CNet Router Installing & Configuring

Let see how to setup & Configure CNet Router

Step-1 : "Start" then click "Control Panal"

Network Status and Tasks >> Network Connections >>
Right click "Local Area Netowrk "select " Local Area Connection Properties" " Local Area Connection Properties" then Internet Protocol Version 4( TCP/IPV4 ) " Properties" >> "Obtain an IP address automatically" এবং " Obtain DNS Server address automaticall >> then " OK" now your Computer ready to detect " IP" see below

Step : connect " Antenna" now connect the Ethernet cable " LAN Port" and PC. Then connect the Power Adapter" to power socket

" IP Address Setup >>" Start >> " Run" >>" write Cmd" then" Ok" opens cmd " here write "IP Config" then " Enter" then in "Default Gateway" you can see your " IP Address" search if not seen " IP" address in " Gateway" then

Step-3 : from your PC Browser write " http:// 192.168.1.1" then " Enter" Logging Screen" appeared input username & password, click " Login"

Step-4 : in " Web Interface" if " Web management interface" not seen review username & password, if not seen then Interface plz reset the Router & click " Next"

Step-5: in " Web interface" you have to connect" WAN" like bellow " BTCL ( ADSL ) or ISP ( Statie/ Dynamic" for "ADSL" write " PPPOE ( ADSL )” input username & pw ,click" Next"

from WAN Connection Type Select DHCP click Next

from "WAN Connection Type" Select "K Static Mode" (Fixed IP) input IP Subnet mask Default Gateway and DNS which you got from ISP click Next

Step-6 : give a SSID, here SSID is SMART and in Security Mode Select WPA- PSK and give a pin/pw then click Apply

You Have finished your setup process, Enjoy

http://www.techtunes.com.bd/networking/tune-id/163268

About Blog Author

This is a short description in the author block about the author. You edit it by entering text in the "Biographical Info" field in the user admin panel.